Improved wheel bearing with longer axle (2014-2020)

This upgrade kit makes the wheel bearing much more durable than when the wheel motor was new.
Poor wheel bearing puts a lot of stress on the gears and causes them to wear out prematurely.
Axle and wheel bearings always wear out on these motors and then this is a very good upgrade that gives the motors a long life.

This kit is mainly sold together with a repair kit for the wheel motor, but can also be purchased separately if the wheel bearing needs to be upgraded afterwards if you bought a simpler repair kit on a previous occasion.
If the motors have not been repaired before, it is recommended to buy a repair kit with improved wheel bearing instead!

This also fits perfectly if you drive with double assembly on the wheels.

The shaft seal is mounted in the plastic bracket with the spring facing the electric motor and lubricated liberally with grease. The old seal must first be removed.

Fits:
320/330X/420/430X/440/450X/520/550 2014v45 and up
435X fits only the axle with large wheels.
On the 435X, it is only possible to mount on one side of the narrow part of the machine, however, the electric motor shaft may need to be ground down slightly to accommodate.
Suitable for example article number: 5863561 58163561

Does not fit:
320 produced in 2013 and 2014 had Linix gearbox
330X manufactured before 2014v45 had Dunker motoren

Contains:

• Longer wheel axle
• Shaft seal
• Adapter with larger outer ball bearing
• Inner ball bearing
• Stainless steel screws for motor bracket

Check the appearance against the picture below, if the gearbox is golden and the attachment to the electric motor is black with 4 locking lugs, it fits.
ATTENTION! Does not fit the new motorthat came around 2020 and has a metal end.



ATTENTION! Image of wheel motor only included as a reference for the spare parts. Wheel motor not included.

For more info, see Instructional video:

Instructions and video clips