Repair kit wheel motor Husqvarna Automower 2020-> 420 430X 435X 440 450X 520 550

ATTENTION! Only for new wheel motors from 2020 onwards with metal motor mount!
A repair kit for both sides to replace the sun gear in the outer part of the wheel motors.
Gears in hardened high-quality steel in our own production. New pins for the planet gears closest to the wheel are included in the kit.
Stainless steel screws with torx and hex key grips that do not slip.
New wheel bearings and shaft seals are included.

Optional:
A stainless steel wheel axle is now also available for these motors. The axles are usually in poor condition if the bearings have gone bad.

Fits:
420/430X/435X/440/450X/520/550 approx. 2020 onwards
Fits, among others, part numbers: 5816213-05, 5816213-06, 5816213-07
Marking on engine:
5863561-05-
5863561-05-G
5863561-06
5863561-06-B
5863561-07
Also sometimes identified by a QR code on the engine.

Does not fit:
Earlier engines with plastic engine mount

Check the appearance against the pictures below, if the motor mount is metal and without  two protrutions in the plastic under the machine then it will fit.
NOTE! Does not fit the old motor with plastic motor mount.

Contains:
(Contents apply to a set of two motors)

• 2X Stainless steel wheel axle (Optional)
• 2X Sun gear
• 8X Stainless steel Allen screw
• 8X Stainless steel Torx screw
• 8X Pins, hardened, ground for outer planet gears
• 4X Ball bearing with rubber seal
• 1X Grease bag (Mobil SHC220)
• 2X Shaft seal

ATTENTION! Image of wheel motor only included as a reference for the spare parts. Wheel motor not included.