Repair kit wheel motor Husqvarna Automower Gardena (2015-19/20)

A repair kit for the wheel motors to replace all gears in the outer part of the gearbox.
Gears in hardened high-quality steel in our own production. New pins for the planet wheels closest to the wheel are included in the kit.
Stainless screws with torx and allen key grips that do not slip.
New wheel bearings are included.
Now there are also various options, see description and text below.
It is also advisable to disassemble the motors before ordering so that you get everything you need at once.

Options:

• Reinforced wheel bearing

Keep in mind that the motor will protrude about 8mm further into the machine if you choose improved wheel bearing. Check that there is room! Also does not fit 105/220AC/305/308/R160 because the bearing adapter has too large a diameter.
Now there is the option to choose an upgrade kit that makes the wheel bearing much stronger and reduces wear on the gears as there will not be any angular errors in the gear engagement for a long time. This is a conversion kit that moves the wheel bearings apart by about 8mm and includes a new longer axle and a new outer bearing holder that replaces the existing outer bearing. The longer distance between the bearings means that the axle is no longer tilted in them. This eliminates the emergency solution of locking fluid between the axle and the wheel bearings that is otherwise recommended. The repair is easier to carry out and gives a good result as it is not easy to get the locking fluid between the bearing and axle in a controlled manner. The axle often gets worn out and this kit removes this weakness that is built into all these engines from the factory and wears out the gears.

Contains:
(contents apply to a kit for two motors)
2X Longer wheel axle
2X Adapter with larger outer ball bearings
8X Stainless screws for engine end cap
2X Shaft seal

• Shaft seal

Shaft seals of better quality than original that have two sealing lips for longer life. The wheel axle always gets a certain amount of wear that wears the original seal so that it becomes oval and does not seal as intended, which can damage the wheel bearings. The seal is located in the plastic end cap and the old one is dismantled and the new one is turned with the spring inwards towards the electric motor and lubricated generously with grease.

• Axle

New wheel axle in standard dimension.

Suitable for:
Keep in mind that the motor will protrude about 9mm further into the machine if you choose improved wheel bearings. Check that there is space enough!
310/315/315X 2015-2020 up to serial number 2027XXXX
105/305/308/220AC of later model years approx. 2014-2016
Sileno Life and City up to serial number 1945XXXX
Gardena R160, Sileno and many other Gardena.
Suitable for, among other things, article numbers:
5874494-04
5874494-03
5874494-02
5816213-01
5849203-02
5849203
5871499
5850246

Check the appearance against the picture below, if the gearbox is golden and the attachment to the electric motor is black with 4 locking lugs, it will fit.

Contains:
(contents apply to a set for two motors)

2x Sun gear
6x Planetary gear
8x Stainless steel Allen screw
8x Stainless steel Torx screw
6x Pins, hardened, ground for outer planet gear
4x Ball bearing with rubber seal
2X Shaft seal (Optional)
2X Wheel axle (Optional)
2X Reinforced wheel bearing (Optional)
1x Grease bag (Mobil SHC220)