Sealing strip chassis 5mm P0

Soft sealing strip that is located between the lower and upper chassis halves.

This sealing strip is good to have at home if you want to check the condition inside the machine or do service. It should always be replaced if you open the machine.

Note! On these machines there are two sealing strips if you unscrew the chassis halves. One seal around the outer edge and a shorter one around the cutting motor in the middle of the machine.

It is recommended to replace the seal when:

• Repair of wheel motors (if the motor cannot be pulled out far enough)
• Wheel motor replacement
• Battery replacement
• Service

The seal is installed with approximately 15mm overlap, just to be safe, check how the seal is mounted before you remove the old one.

Fits:
Husqvarna Automower 115H
Gardena Sileno City, Sileno life
McCulloch ROB S400, 500, 600, 800