Sealing strip chassis 5mm P1

Soft sealing strip that sits between the lower and upper chassis halves of the smaller machines.

This sealing strip is good to have at home if you want to check the condition inside the machine or do service. It must always be changed if you open the machine.

Note! on these machines there are two sealing strips if you unscrew the chassis halves. A seal around the outer edge and a shorter one around the cutting motor in the center of the machine. If you want to remove the display, there is also a short sealing strip there.

The seal is recommended to be replaced when:

• Refurbishment of wheel motors (if they cannot be pulled out far enough)
• Battery replacement

To be safe, check how the seal is mounted before removing the old seal.

Fits:
Husqvarna Automower 105 305 308
Gardena R38Li, R40Li, R45Li, R50Li, R70Li, R75Li, R80Li