Sealing strip display/cutting motor 4mm P1

Soft sealing strip that sits in the middle of the machine around the cutting motor and between the upper half of the chassis and the display on the smaller machines.

Note! on these machines there are two sealing strips if you unscrew the chassis halves. A seal around the outer edge and a shorter one around the cutting motor in the center of the machine. If you want to remove the display, there is also a short sealing strip there.

This sealing strip is good to have at home if you want to check the condition inside the machine or do service. It must always be changed if you open the machine.

The seal is recommended to be replaced when:
Refurbishment of wheel motors (if they cannot be pulled out far enough)
Battery replacement
Changing the display
Keypad replacement
Cleaning the stop button
Cleaning the hinge of the display cover
Just to be safe, check how the seal is mounted before you remove the old one.

Fits:
Husqvarna Automower 105 305 308
Gardena R38Li, R40Li, R45Li, R50Li, R70Li, R75Li, R80Li