Skid plate P2 MK1

Skid plate that is located under the cutting disc.
Klipparservice's own variant on disc with only one hole instead of three.
This reduces the disturbing noise that can sometimes occur when the screws of the knives pass the holes.
Another advantage is that this also reduces the wear on the disc and the noise that occurs if, for example, you have an apple lying on the lawn that the lawnmower runs into. It also reduces the load on the cutting motor in these situations.

For early 320/330X, this small disc is no longer available to buy as a spare part at Husqvarna, but the one I have produced is with the original diameter, the same as the cutting disc, which gives just as good cutting results as the original!

Corresponds to Husqvarna's article number: 581 62 19-01

Fits:
Husqvarna Automower 320(2013-2015), 330X(2013-2015)
Late 2015 was changed to the newer type of sheet metal. Then choose it from 420 instead.
ATTENTION! Only suitable if there are 4 screws that fasten the disc in the middle with an aluminum cover. If there is a plastic cap in the middle, it will not fit!